 |
 |
Pfauter
PE150
Gear
Hobber
6
Axis
NUM
CNC Control
|
|
To retain
your competitive edge your equipment must keep pace with all
the technological advancements that are constantly being made
in the industry. So
when you have an older machine that’s sound but needs an
upgrade Stanley Howard Euro are here to assist.
By rebuilding older machines and upgrading with the
latest technology, you are saving time and money compared to
the investment required in a new piece of equipment.
At Stanley
Howard we strip the machine right down to basics, clean and
paint it to the Customer’s RAL specification and replace or
refurbish worn parts. Working
closly with NUM UK, we retrofit these machines with the NUM
Axium control, digital motors and drives complete with a new
control panel.
One of the
benefits of working NUM UK is the superb software package NUMGear
offering conversational control to create hobbing (grinding)
cycles without the need for CNC programming skills.
We will
refurbish and retrofit the customers own machine, locate a
machine on the customers behalf or provide one from our stock
of gear machines.
|
•From:
•Relay
logic control
•manual
setup I.e. gear changes
•fixed
feeds and speeds
•hob
to 2.5 mod
•crowning
to manual template
•gear
knowledge/skill high
|
To:•
•Full
digital CNC with conversational
control
•programmable
setup
•unlimited
feeds and speeds
•hob
to 3.0 mod
•crowning
or any form generated
automatically
•tooth
alignment through CNC
•de-skilling
of operators
|
|
We
have the ability to turn a manual machine into a 5
axis CNC
|
 |
 |
Koepfer
173 Gear
Hobber
5
Axis, NUM CNC Control
|
|
 |
 |
 |
Assembly
of B axis & slides
|
Assembly
and painting of
machine
base
|
Assembly
of hob head
|
 |
 |
 |
|
|
Assembly
of worktable worms
&
worm wheels
|
Electrical
panel and
digital
drives
|
 |
 |
 |
|
|
|
Commission
& test
First
off component
|
|
|
|
We
are always looking for new developments and
technological advancements that will benefit our
customers.
For
one of our customers we developed a torque motor
design to replace the main spindle index gear drive
with integral clamping system on a Koepfer 153 gear
hobber.
The
benefits being a direct motor drive providing
accuracy, eliminates angular backlash and provides
higher speeds
|
 
We
are able to use this development on any spindle or
table for any gear machine the customer requires.
|
|
|
|
CNC
Retrofitting Services |
|
